Single row cylindrical roller bearings with cage are units that include solid inner and outer rings and cylindrical roller and cage assemblies. The outer ring has rigid ribs or no ribs on both sides, while the inner ring has one or two rigid ribs or is designed without ribs. The cage prevents the cylindrical rollers from contacting each other during the rolling process. Cylindrical roller bearings are available with or without cages.
“Classic” cylindrical roller bearings have a higher radial load capacity and high stiffness. In addition to bearing high radial loads, cylindrical roller bearings can also bear axial loads if used as semi-locating or locating bearings. Radial loads are transmitted through the raceways, while axial loads are transmitted through the rolling element end faces and ribs, which of course limits the axial load. This is where Schaeffler comes in!
Full complement INA cylindrical roller bearings + FAG cylindrical roller bearings with cage = a solution for every application
To significantly extend the service life of bearings under axial load. The special curvature of the roller end surface allows the load to be distributed over a larger surface area. The curved roller end increases the size of the contact surface and therefore significantly reduces contact pressure.
